# Latest **URL:** https://forum.embeetle.com/latest.md?page=1 [Latest](https://forum.embeetle.com/latest.md) · [Categories](https://forum.embeetle.com/categories.md) · [Tags](https://forum.embeetle.com/tags.md) **Page:** 2 --- ## [BluePill recording failed](https://forum.embeetle.com/t/bluepill-recording-failed/892)
**Author:** [@Cleidir](https://forum.embeetle.com/u/Cleidir)\ **Replies:** 2\ **Last updated:** [March 1, 2024, 3:42pm UTC](https://forum.embeetle.com/t/bluepill-recording-failed/892 "2024-03-01T15:42:47Z")
I was having a problem recording my bluepill, below is the error message. Open On-Chip Debugger 0.10.0+dev-01438-gc1f4d9e6e (2020-10-30-15:04) Licensed under GNU GPL v2 For bug reports, read http://openocd.org/doc/do… --- ## [Adding new Micros](https://forum.embeetle.com/t/adding-new-micros/886)
**Author:** [@vikgomat](https://forum.embeetle.com/u/vikgomat)\ **Replies:** 2\ **Last updated:** [February 11, 2024, 2:06pm UTC](https://forum.embeetle.com/t/adding-new-micros/886 "2024-02-11T14:06:52Z")
I know others have raised this question. But, is there a possibility of users adding new micro platforms to the list of available devices? Even if its a github contribution, that would still be a great option for peopl… --- ## [\[Solved\]Typedef uint16\_t on ARM](https://forum.embeetle.com/t/solved-typedef-uint16-t-on-arm/883)
**Author:** [@Adventurer](https://forum.embeetle.com/u/Adventurer)\ **Replies:** 2\ **Last updated:** [February 9, 2024, 7:41pm UTC](https://forum.embeetle.com/t/solved-typedef-uint16-t-on-arm/883 "2024-02-09T19:41:35Z")
Hi, I just came across Embeetle. I created a new project for my RPi Pico and then copied the code of one of my favorite projects into it. This project uses a library that uses the C++ typedefs uint16\_t and uint8\_t. W… --- ## [Build issue with CH32V](https://forum.embeetle.com/t/build-issue-with-ch32v/878)
**Author:** [@Garvin](https://forum.embeetle.com/u/Garvin)\ **Replies:** 2\ **Last updated:** [February 5, 2024, 11:07am UTC](https://forum.embeetle.com/t/build-issue-with-ch32v/878 "2024-02-05T11:07:26Z")
Hy community, I install the latest version of the embeetle IDE and I followed the install manual on the page. If i start embeetle and open the project for the ch32v, then I get the following error measures: Diagnostic… --- ## [Code example to use the RPi pico UART](https://forum.embeetle.com/t/code-example-to-use-the-rpi-pico-uart/871)
**Author:** [@Cleidir](https://forum.embeetle.com/u/Cleidir)\ **Replies:** 1\ **Last updated:** [January 31, 2024, 8:44am UTC](https://forum.embeetle.com/t/code-example-to-use-the-rpi-pico-uart/871 "2024-01-31T08:44:07Z")
Hi guys, I share with you a modification of the blinky example for the RPi pico. In this modification I use the RPi pico w, I modified the blinky pin of the LED and I call the debug\_uart.c and debug\_uart.h libraries. T… --- ## [Blinky example for RP pico W does not work](https://forum.embeetle.com/t/blinky-example-for-rp-pico-w-does-not-work/868)
**Author:** [@Cleidir](https://forum.embeetle.com/u/Cleidir)\ **Replies:** 1\ **Last updated:** [January 26, 2024, 10:52pm UTC](https://forum.embeetle.com/t/blinky-example-for-rp-pico-w-does-not-work/868 "2024-01-26T22:52:55Z")
Hi guys, I come here to present a problem I had with the example project for the Raspberry Pi pico microcontroller. Using a PICO W as Target I noticed that the board’s LED did not blink, however when I used the PICO wit… --- ## [Error -1073741502 or 0xc0000142 when using "clean" on Windows](https://forum.embeetle.com/t/error-1073741502-or-0xc0000142-when-using-clean-on-windows/864)
**Author:** [@ygramoel](https://forum.embeetle.com/u/ygramoel)\ **Replies:** 2\ **Last updated:** [January 24, 2024, 10:22am UTC](https://forum.embeetle.com/t/error-1073741502-or-0xc0000142-when-using-clean-on-windows/864 "2024-01-24T10:22:45Z")
You may experience the following error when pressing “clean” in Embeetle: There is a popup reading The application was unable to start correctly (0xc0000142) When you click OK, the Embeetle output window shows this… --- ## [Using a Linux-style shell on Windows](https://forum.embeetle.com/t/using-a-linux-style-shell-on-windows/865)
**Author:** [@ygramoel](https://forum.embeetle.com/u/ygramoel)\ **Replies:** 0\ **Last updated:** [January 23, 2024, 10:43am UTC](https://forum.embeetle.com/t/using-a-linux-style-shell-on-windows/865 "2024-01-23T10:43:14Z")
With the default makefile, make will always use cmd-style commands when started from Embeetle. It is possible to override this behavior by adding a few lines near the beginning of the makefile. For example, to use an … --- ## [How to download firmware via USB to RP Pico or how to download firmware via uf2 file](https://forum.embeetle.com/t/how-to-download-firmware-via-usb-to-rp-pico-or-how-to-download-firmware-via-uf2-file/834)
**Author:** [@Temurumaru](https://forum.embeetle.com/u/Temurumaru)\ **Replies:** 6\ **Last updated:** [December 23, 2023, 7:45pm UTC](https://forum.embeetle.com/t/how-to-download-firmware-via-usb-to-rp-pico-or-how-to-download-firmware-via-uf2-file/834 "2023-12-23T19:45:54Z")
How to download firmware via USB to RP Pico or how to download firmware via uf2 file. --- ## [Microchip support](https://forum.embeetle.com/t/microchip-support/832)
**Author:** [@diilk](https://forum.embeetle.com/u/diilk)\ **Replies:** 1\ **Last updated:** [December 5, 2023, 2:59pm UTC](https://forum.embeetle.com/t/microchip-support/832 "2023-12-05T14:59:13Z")
Hi All, I discovered Embeetle only yesterday, and am really impressed by it. In fact, I seriously consider making it my main IDE as soon as there is support for some of the MCUs which I normally use - PIC32MX and PIC32M… --- ## [Embeetle Debugger keyboard shortcut features](https://forum.embeetle.com/t/embeetle-debugger-keyboard-shortcut-features/827)
**Author:** [@MisterZeroOne](https://forum.embeetle.com/u/MisterZeroOne)\ **Replies:** 1\ **Last updated:** [November 25, 2023, 1:06pm UTC](https://forum.embeetle.com/t/embeetle-debugger-keyboard-shortcut-features/827 "2023-11-25T13:06:14Z")
Hi, I’m just playing with Embeetle running some sample code on CH32V003F4P6 I would suggest to add debugger keyboard shortcuts for the following commands Run Step Into Step Over Skip function Run to Cursor Restart Pa… --- ## [Adding MCU variants (CH32V203 G6U6)](https://forum.embeetle.com/t/adding-mcu-variants-ch32v203-g6u6/825)
**Author:** [@HansPolders](https://forum.embeetle.com/u/HansPolders)\ **Replies:** 3\ **Last updated:** [November 24, 2023, 9:57am UTC](https://forum.embeetle.com/t/adding-mcu-variants-ch32v203-g6u6/825 "2023-11-24T09:57:21Z")
Hi, I’m playing with embeetle to program CH32V MCU’s. The reason is that I’m looking for an alternative to the Mounriver IDE as the board we’re developing will be used by kids and Embeetle looks mucht simpler to use. Bu… --- ## [Cannot get blinky working on CIP United board](https://forum.embeetle.com/t/cannot-get-blinky-working-on-cip-united-board/770)
**Author:** [@kristof](https://forum.embeetle.com/u/kristof)\ **Replies:** 2\ **Last updated:** [September 5, 2023, 7:45am UTC](https://forum.embeetle.com/t/cannot-get-blinky-working-on-cip-united-board/770 "2023-09-05T07:45:09Z")
I can’t get the blinky project to work properly on the PIC32MZ CIP United board. I’ll explain here all the steps I’ve gone through in detail. Note: I’m working on Ubuntu Description: Ubuntu 23.04 Release: 23.04 C… --- ## [Where to put your key file](https://forum.embeetle.com/t/where-to-put-your-key-file/746)
**Author:** [@kristof](https://forum.embeetle.com/u/kristof)\ **Replies:** 0\ **Last updated:** [June 26, 2023, 2:27am UTC](https://forum.embeetle.com/t/where-to-put-your-key-file/746 "2023-06-26T02:27:47Z")
Some boards and microcontrollers we currently support in Embeetle, are still in an experimental phase. That means we don’t yet release them publicly. You’re probably reading this post because we gave you early access to … --- ## [Regression in OpenOCD 0.11.0 and 0.12.0](https://forum.embeetle.com/t/regression-in-openocd-0-11-0-and-0-12-0/701)
**Author:** [@kristof](https://forum.embeetle.com/u/kristof)\ **Replies:** 3\ **Last updated:** [April 20, 2023, 2:07pm UTC](https://forum.embeetle.com/t/regression-in-openocd-0-11-0-and-0-12-0/701 "2023-04-20T14:07:52Z")
@roboter discovered a regression in OpenOCD 0.11.0 and 0.12.0. Some .elf files can be flashed with OpenOCD 0.10.0 while versions 0.11.0 and 0.12.0 are unable to flash the same .elf file. Below I’ll explain everything yo… --- ## [Missing data to create GigaDevice sample projects for Embeetle](https://forum.embeetle.com/t/missing-data-to-create-gigadevice-sample-projects-for-embeetle/702)
**Author:** [@kristof](https://forum.embeetle.com/u/kristof)\ **Replies:** 0\ **Last updated:** [April 17, 2023, 1:38pm UTC](https://forum.embeetle.com/t/missing-data-to-create-gigadevice-sample-projects-for-embeetle/702 "2023-04-17T13:38:01Z")
For the four GigaDevice boards we currently support in Embeetle, GigaDevice sent me a working Eclipse-based project for each of them. Also, GigaDevice forked OpenOCD and made sure that these four boards functioned proper… --- ## [New nRF52 boards don't work anymore with OpenOCD](https://forum.embeetle.com/t/new-nrf52-boards-dont-work-anymore-with-openocd/700)
**Author:** [@kristof](https://forum.embeetle.com/u/kristof)\ **Replies:** 0\ **Last updated:** [April 16, 2023, 4:42pm UTC](https://forum.embeetle.com/t/new-nrf52-boards-dont-work-anymore-with-openocd/700 "2023-04-16T16:42:08Z")
New versions of the nRF52 chips have an improved implementation of the Acess Port Protection Mechanism. Their APPROTECT bit is set to 1 by default, such that the firmware in Flash memory cannot be accessed through the SW… --- ## [Random assortment of my suggestions and ideas (micropython, code formatting, binary section viewer, ...)](https://forum.embeetle.com/t/random-assortment-of-my-suggestions-and-ideas-micropython-code-formatting-binary-section-viewer/684)
**Author:** [@Hynreck](https://forum.embeetle.com/u/Hynreck)\ **Replies:** 9\ **Last updated:** [March 24, 2023, 9:41am UTC](https://forum.embeetle.com/t/random-assortment-of-my-suggestions-and-ideas-micropython-code-formatting-binary-section-viewer/684 "2023-03-24T09:41:54Z")
Hi there :slight\_smile: hope you all made it back home easily after last weeks embedded world. Here are a bunch of ideas, as requested I’ll be dumping them here. Take it with a few grams of salt :smiley: Micropython… --- ## [Linux, Can not use debug feature on IDE version 0.7.6](https://forum.embeetle.com/t/linux-can-not-use-debug-feature-on-ide-version-0-7-6/664)
**Author:** [@Dungnt98](https://forum.embeetle.com/u/Dungnt98)\ **Replies:** 6\ **Last updated:** [February 21, 2023, 4:37pm UTC](https://forum.embeetle.com/t/linux-can-not-use-debug-feature-on-ide-version-0-7-6/664 "2023-02-21T16:37:17Z")
I have done some tests with IDE version 0.7.6 and I that can not use debug feature. with KL46Z256VLL board, when click and release on debug button, do not have anything affect. with STM32 boards, can not connect debug… --- ## [How to start Embeetle from the file explorer](https://forum.embeetle.com/t/how-to-start-embeetle-from-the-file-explorer/652)
**Author:** [@ygramoel](https://forum.embeetle.com/u/ygramoel)\ **Replies:** 0\ **Last updated:** [December 8, 2022, 5:14pm UTC](https://forum.embeetle.com/t/how-to-start-embeetle-from-the-file-explorer/652 "2022-12-08T17:14:59Z")
To start embeetle on Windows, you can simply double-click embeetle.exe in the top folder of the Embeetle installation. You can also right-click embeetle.exe and select Pin to start or Pin to taskbar or Create shortcut t… --- ## [Software not responding after starting a project](https://forum.embeetle.com/t/software-not-responding-after-starting-a-project/644)
**Author:** [@HoangTran](https://forum.embeetle.com/u/HoangTran)\ **Replies:** 1\ **Last updated:** [October 24, 2022, 8:10am UTC](https://forum.embeetle.com/t/software-not-responding-after-starting-a-project/644 "2022-10-24T08:10:35Z")
Hi all, I’m starting Embeetle version 0.5.9 but the software is not always responding. I have recorded my screen add uploaded my source code in here: NotResponding – Google Drive thanks all. --- ## [Cannot flash despite installing the board, the probe and being on the right port :)](https://forum.embeetle.com/t/cannot-flash-despite-installing-the-board-the-probe-and-being-on-the-right-port/602)
**Author:** [@Daja](https://forum.embeetle.com/u/Daja)\ **Replies:** 7\ **Last updated:** [July 25, 2022, 12:40pm UTC](https://forum.embeetle.com/t/cannot-flash-despite-installing-the-board-the-probe-and-being-on-the-right-port/602 "2022-07-25T12:40:37Z")
Hello! We met at Embedded World and I really liked Embeetle. I am trying it on Ubuntu 22, and struggling with a simple flash on my board. I did install the board and the probe as per the instruction (it is not a clone… --- ## [GD32L233CCT6 support](https://forum.embeetle.com/t/gd32l233cct6-support/581)
**Author:** [@jedP](https://forum.embeetle.com/u/jedP)\ **Replies:** 1\ **Last updated:** [June 27, 2022, 9:47am UTC](https://forum.embeetle.com/t/gd32l233cct6-support/581 "2022-06-27T09:47:59Z")
Hi guys using the dropdown menu from the IDE it does not seem like you support the micro in the title is that true or will another option work? --- ## [I have a new MCU(cortexM0+ core with 2.4GHz radio) which using keil now, can you make embettle support it?](https://forum.embeetle.com/t/i-have-a-new-mcu-cortexm0-core-with-2-4ghz-radio-which-using-keil-now-can-you-make-embettle-support-it/553)
**Author:** [@seacer](https://forum.embeetle.com/u/seacer)\ **Replies:** 3\ **Last updated:** [February 25, 2022, 2:43pm UTC](https://forum.embeetle.com/t/i-have-a-new-mcu-cortexm0-core-with-2-4ghz-radio-which-using-keil-now-can-you-make-embettle-support-it/553 "2022-02-25T14:43:49Z")
I can spend money for it. At first, I want to buy a keil license, but they don’t respond to me. And the ARM website is maintenance and not let me login! I have no choice, so , can you help me to make embettle suport it… --- ## [I am trying to do some edu project based on embeetle IDE](https://forum.embeetle.com/t/i-am-trying-to-do-some-edu-project-based-on-embeetle-ide/550)
**Author:** [@seacer](https://forum.embeetle.com/u/seacer)\ **Replies:** 3\ **Last updated:** [January 4, 2022, 1:04pm UTC](https://forum.embeetle.com/t/i-am-trying-to-do-some-edu-project-based-on-embeetle-ide/550 "2022-01-04T13:04:45Z")
embeetle IDE is really great work. Sevel month ago, I found it but it not work that time, today, I retry, it work! I am in China, so download speed a little slow but it seems succeessed. I will do some project based on … --- ## [Source Analyzer engine blocked](https://forum.embeetle.com/t/source-analyzer-engine-blocked/547)
**Author:** [@joyzpa](https://forum.embeetle.com/u/joyzpa)\ **Replies:** 1\ **Last updated:** [December 30, 2021, 10:29am UTC](https://forum.embeetle.com/t/source-analyzer-engine-blocked/547 "2021-12-30T10:29:51Z")
Hi All, Its been a while since I used Embeetle and now I tried to use it on my Windows laptop. For some reason when I open a project, like arduino blinky (downloaded from embeetle cloud), it opens the project and after … --- ## [Can not update IDE](https://forum.embeetle.com/t/can-not-update-ide/545)
**Author:** [@Dungnt98](https://forum.embeetle.com/u/Dungnt98)\ **Replies:** 1\ **Last updated:** [December 6, 2021, 3:59pm UTC](https://forum.embeetle.com/t/can-not-update-ide/545 "2021-12-06T15:59:35Z")
I have seen that IDE had an updates version. I tryed to update it but gotten update error as picture. I’m using Ubuntu 20.04.3 LTS. Please check this error. --- ## [Avrdude: stk500\_getsync() attempt 10 of 10: not in sync: resp=0x6e](https://forum.embeetle.com/t/avrdude-stk500-getsync-attempt-10-of-10-not-in-sync-resp-0x6e/516)
**Author:** [@paul](https://forum.embeetle.com/u/paul)\ **Replies:** 10\ **Last updated:** [October 25, 2021, 7:40am UTC](https://forum.embeetle.com/t/avrdude-stk500-getsync-attempt-10-of-10-not-in-sync-resp-0x6e/516 "2021-10-25T07:40:25Z")
Hi, I’m trying to program an Arduino Nano by using embeetle IDE, but I come across a problem, to be more specific, when I try to build even a sample project for Arduino Nano everything is going fine, but when I try to fl… --- ## [Embeetle updater failing on Fedora 33 LXDE](https://forum.embeetle.com/t/embeetle-updater-failing-on-fedora-33-lxde/506)
**Author:** [@joyzpa](https://forum.embeetle.com/u/joyzpa)\ **Replies:** 6\ **Last updated:** [October 15, 2021, 7:14pm UTC](https://forum.embeetle.com/t/embeetle-updater-failing-on-fedora-33-lxde/506 "2021-10-15T19:14:20Z")
Hi again, Finally had a bit of time to get troubleshooting the update problem as it happened again now with the latest version of Embeetle update. Previous problem was discusssed here: Moving from Arduino IDE to Embeetl… --- ## [My experience with Embeetle so far](https://forum.embeetle.com/t/my-experience-with-embeetle-so-far/490)
**Author:** [@ramses](https://forum.embeetle.com/u/ramses)\ **Replies:** 11\ **Last updated:** [October 1, 2021, 1:25pm UTC](https://forum.embeetle.com/t/my-experience-with-embeetle-so-far/490 "2021-10-01T13:25:59Z")
Hi all! I recently started using Embeetle after having difficulties with using a custom library with the Arduino IDE. Perhaps I’ll first situate myself somewhat, so that you have at least some idea from which perspectiv… [Previous page](https://forum.embeetle.com/latest.md) [Next page](https://forum.embeetle.com/latest.md?page=2)